PEARLECENT OPAL Vinyl Teckwrapcraft

Last  remaining stock for 7OneStudio 

Pearlescent Opal Vinyl by Teckwrapcraft 

FREEDELIVERY at the checkout

Pearlescent opal vinyl is different from the previous sheets pack. The surface is much more smooth and this vinyl give a pearlescent look which makes the vinyl itself glow. There is no protective layer on pearlescent vinyl. More importantly, it can be easily cut. 

A.Product Description:

12"x 2.5ft (loose)

A4 Sheets

"Seconds" Mean they have a small imperfection- Price reflects this.

A TEST CUT is always recommended.                                                                 

Surface Finish: No Protective Layer
Matte transfer tape and purple grid transfer tape is recommended

How to Do It
1. Clean Surface - prepare target surface clean and dry with alcohol, the smoother the surface the easier to transfer the vinyl.
2. Design with cutter - put on a cutting mat that has a sticky back and cut the design by cutting machine.
3. Weeding the excess vinyl - leave the letters/graphics on the sheet (hook tools work well).
4. Apply the transfer paper - gently put a transfer tape on the surface of the cut vinyl.
Use a scraper over the design and make sure the transfer tape is adhering to the vinyl nice and tight.
5. Adhere it to the new clean and dry flat surface slowly- carefully work with delicate patterns.
6. Remove Transfer paper - rub the clear tape carefully from the centre out to adhere the vinyl securely.

Notice:
Please note that colours appear slightly different on computer monitors